Accessing the server
Type the appropriate telephone number to access the active server. For more information
●
about the customer-supplied telephone numbers, see the completed Electronic
Preinstallation Worksheet.
Under Advanced, select PPP and log on manually. You might have to type a user name
●
and a password. This entry depends on whether the server you are dialing into has a
non-null CHAP secret key. If you must type a user name and a password, use craft as
the user name and ignore the Password field.
Dialing up to the server
To dial up, click the connection name or the icon, if you created an icon when you set up the
connection. Once you are connected:
1. When prompted, enter your remote access login name and password.
2. When you see the Start PPP now! message, click Done. When you see the Connection
Complete dialog box, your computer is connected to the server.
3. To open an SSH session, see
Finding the IP address of the active server (duplicated servers)
To find the IP address of the active server in a configuration with duplicated servers:
1. Go to the task bar at the bottom right of your PC screen.
2. Right-click the Network Status icon. Click Status, and then click the Details tab.
3. Scroll down until you see the Server IP address. This IP address is for the server to which
you are connected.
Disabling the boot timeout of the SAMP board
Note:
You can also disable the boot timeout of the SAMP board by connecting to the
Note:
SAMP services port and using the SAMP's Web pages. For more information,
see "Disabling the boot timeout on Release 3.1 using the SAMP Web page" in
the Using the Avaya Server Availability Management Processor (SAMP),
03-300322.
234 Upgrading Avaya Aura™ Communication Manager on Avaya S8xxx Servers
Using the command line interface
on page 236.