Toyota T100 1996 Service Manual page 757

EM−34
10
6
2
1
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
P14676
4
8
3
7
9
5
Z11082
P14675
P14911
− CYLINDER HEAD
HINT:
When removing the camshaft, make sure that the torsional
spring force of the sub−gear has been eliminated by the above
operation.
(b) Uniformly loosen and remove the 10 bearing cap bolts in
several passes, in the sequence shown.
(c) Remove the 5 bearing caps and camshaft.
HINT:
If the camshaft is not being lifted out straight and level, reinstall
the No.3 bearing cap with the 2 bolts. Then alternately loosen
and remove the bearing cap bolts with the camshaft gear pulled
up.
NOTICE:
Do not pry on or attempt to force the camshaft with a tool
or other object.
(d) Remove intake camshaft.
(1) Uniformly loosen and remove 10 bearing cap bolts
in several passes, in the sequence shown.
(2) Remove the 5 bearing caps and camshaft.
HINT:
If the camshaft is not being lifted out straight and level, reinstall
the No.3 bearing cap with the 2 bolts. Then alternately loosen
and remove the 2 bearing cap bolts with the camshaft gear
pulled up.
NOTICE:
Do not pry on or attempt to force the camshaft with a tool
or other object.
30. DISASSEMBLE EXHAUST CAMSHAFT
(a) Mount the hexagon wrench head portion of the camshaft
in a vise.
NOTICE:
Be careful not to damage the camshaft.