P24692
P15073
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
19.
(a)
(b)
NOTICE:
Be careful not to drop the injectors when removing the de-
livery pipe.
(c)
A03788
(d)
(e)
20.
Remove the 3 bolts, 2 nuts, intake manifold and gasket.
P22272
21.
(a)
(b)
(c)
(d)
A03789
22.
(a)
(b)
23.
(a)
(b)
P14686
−
CYLINDER HEAD
REMOVE DELIVERY PIPE AND INJECTORS
Disconnect the vacuum hose from the fuel pressure regu-
lator.
Remove the 2 bolts and delivery pipe together with the 4
injectors.
Remove the 4 insulators from the 4 spacers.
Pull out the 4 injectors from the delivery pipe.
Remove the O−ring and grommet from each injector.
REMOVE INTAKE MANIFOLD
REMOVE FRONT EXHAUST PIPE
Remove the 2 bolts, and retainer holding the front ex-
haust pipe from the TWC.
Loosen the clamp bolt and disconnect the clamp from the
support bracket.
Remove the 2 bolts and support bracket.
Remove the 3 nuts, front exhaust pipe and 3 gaskets.
REMOVE EXHAUST MANIFOLD
Remove the 2 bolts, 2 nuts and heat insulator.
Remove the 6 nuts, exhaust manifold and gasket.
REMOVE NO.1 ENGINE HANGER
Remove the bolt and No.1 engine hanger.
Remove the bolt and ground strap.
EM−31