Toyota T100 1996 Service Manual page 755

EM−32
Dot Mark
P15751
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
24.
Remove the 10 bolts, cylinder head cover and gasket.
25.
P14687
26.
(a)
P14695
(b)
A01399
27.
Remove the 2 nuts, chain tensioner and gasket.
P14636
28.
(a)
(b)
A03790
− CYLINDER HEAD
REMOVE CYLINDER HEAD COVER
REMOVE SPARK PLUGS
SET NO.1 CYLINDER TO TDC/COMPRESSION
Turn the crankshaft pulley clockwise and align its groove
with the "0" mark on the timing chain cover.
Check that the timing marks (1 and 2 dots) of the camshaft
drive and driven gears are in straight line on the cylinder
head surface as shown in the illustration. If not, turn the
crankshaft 1 revolution (360°) and align the marks as
above.
REMOVE CHAIN TENSIONER
REMOVE CAMSHAFT TIMING GEAR
Remove the 2 semi−circular plugs.
Place the matchmarks on the camshaft timing gear and
No.1 timing chain.