Toyota T100 1996 Service Manual page 739

EM−16
P14973
SST
Crankshaft Pulley Bolt
Pin
P14932
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
(c)
(d)
14.
A03726
15.
HINT:
If necessary, remove the gear with SST and crankshaft pulley
bolt.
P18142
16.
(a)
(b)
P14923
17.
(a)
P15081
(b)
A03727
− TIMING CHAIN
Remove the 9 mounting bolts and 2 mounting nuts.
Using a plastic−faced hammer, loosen the chain cover
and remove the timing chain cover and 3 gaskets.
REMOVE NO.1 TIMING CHAIN AND CAMSHAFT
TIMING GEAR
REMOVE CRANKSHAFT TIMING GEAR
SST 09950−40010 (09951−04010, 09952−04010,
09953−04010, 09954−04010, 09955−04060)
REMOVE NO.1 TIMING CHAIN TENSIONER
SLIPPER AND NO.1 VIBRATION DAMPER
Remove the bolt and slipper.
Remove the bolt, nut and No.1 damper.
REMOVE NO.2, NO.3 VIBRATION DAMPERS AND
NO.2 CHAIN TENSIONER
Install a pin to the No.2 chain tensioner and lock the
plunger.
Remove the bolt and No.2 damper.