Toyota T100 1996 Service Manual page 742

P14927
P14933
Free
Lock
Air
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
2.
Measure the chain tensioner slipper and vibration damper
wears.
If the wear is greater than maximum, replace the slipper and/or
dampers.
A03753
A03754
3.
(a)
P14928
P14929
(b)
If necessary, replace the oil jet (No.2 chain tensioner).
P14934
− TIMING CHAIN
INSPECT CHAIN TENSIONER SLIPPER AND VIBRA-
TION DAMPERS
Maximum wear: 1.0 mm (0.039 in.)
INSPECT NO.2 CHAIN TENSIONER
Inspect the chain tensioner
Check that the plunger moves smoothly when the
S
ratchet pawl is raised with your finger.
Release the ratchet pawl and check that the plung-
S
er is locked in place by the ratchet pawl and does
not move when pushed with your finger.
Inspect the oil jet (No.2 chain tensioner).
Check the oil jet for damage or clogging.
EM−19