Toyota T100 1996 Service Manual page 746

P14986
P15097
P14954
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
(d)
(e)
A03762
8.
(a)
(b)
(c)
A03763
9.
Install a new gasket and oil strainer with the 2 bolts and 2 nuts.
A03764
− TIMING CHAIN
Install the 2 timing chain cover mounting bolts.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
Install the 2 No.1 water bypass pipe mounting nuts.
Torque: 20 N·m (200 kgf·cm, 14 ft·lbf)
INSTALL CRANKSHAFT PULLEY
Align the pulley set key with the key groove of the pulley,
and slide on the pulley.
Using SST, install and torque the pulley bolt.
SST 09213−54015, 09330−00021
Torque: 260 N·m (2,650 kgf·cm, 193 ft·lbf)
w/ A/C:
Install the No.3 and No.2 crankshaft pulleies with the 4
bolts.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
INSTALL OIL STRAINER
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
EM−23