ip slb admin
Enables or disables the administrative status for Server Load Balancing (SLB) on a switch.
ip slb admin {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
Disabling the administrative status for the SLB feature does not delete the SLB configuration from the
switch. The next time the feature is enabled, the existing configuration will go active.
Examples
-> ip slb admin enable
-> ip slb admin disable
Release History
Release 6.1; command was introduced.
Related Commands
show ip slb
ip slb cluster
ip slb server ip cluster
MIB Objects
slbFeature
slbAdminStatus
page 26-2
Enables Server Load Balancing on a switch.
Disables Server Load Balancing on a switch.
default
disable
Displays the status of Server Load Balancing on a switch.
Configures a Server Load Balancing cluster on a switch.
Adds, deletes, or modifies parameters of physical servers in logical
Server Load Balancing clusters.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide
June 2012