Dell PowerEdge M420 Reference Manual page 116

Command
sntp
show ip dhcp binding
show ip dhcp conflict
show ip dhcp global
configuration
show ip dhcp pool
show ip dhcp server
statistics
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
DHCPv6
Command
clear ipv6 dhcp
dns-server
domain-name
ipv6 dhcp pool
ipv6 dhcp relay
ipv6 dhcp server
prefix-delegation
service dhcpv6
show ipv6 dhcp
116
Command Groups
Description
Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
Displays the configured DHCP bindings.
Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
Displays the DHCP global configuration.
Displays the configured DHCP pool or pools.
Displays the DHCP server binding and message
counters.
Description
Clears DHCPv6 statistics for all interfaces or for
a specific interface.
Sets the IPv6 DNS server address which is
provided to a DHCPv6 client by the DHCPv6
server.
Sets the DNS domain name which is provided
to a DHCPv6 client by the DHCPv6 server.
Enters IPv6 DHCP Pool Configuration mode.
Configures an interface for DHCPv6 relay
functionality.
Configures DHCPv6 server functionality on an
interface.
Defines Multiple IPv6 prefixes within a pool for
distributing to specific DHCPv6 Prefix
delegation clients.
Enables DHCPv6 configuration on the router.
Displays the DHCPv6 server name and status.
a
Mode
DP
PE
PE
PE
UE or
PE
PE
a
Mode
PE
v6DP
v6DP
GC
IC
IC
v6DP
GC
PE