Dell PowerEdge M420 Reference Manual page 171

Port Channel Interfaces
Port-channel (or LAG) interfaces are represented in the CLI by the variable
port-channel-number
When listed in command line output, port channel interfaces are preceded by
Po,
the characters
Loopback Interfaces
Loopback interfaces are represented in the CLI by the variable
which can assume values from 0–7.
VLAN Interfaces
VLAN interfaces are represented in the CLI by the variable
can can assume values from 1-4093.
Tunnel Interfaces
VLAN interfaces are represented in the CLI by the variable
can can assume values from 0–7.
Examples
Example #1
gigabitethernet 1/0/1
gigabitethernet1/0/1
gi 1/0/1
gi1/0/1 (there is no space)
port-channel 1
vl 5
Example #2
console#show vlan
VLAN Name
----- ---------------
., which can can assume values from 1-48.
as shown in the preceding example:
(there is no space)
Ports
-------------
loopback-id
vlan-id
, which
tunnel-id
, which
Type
--------------
Using the CLI
,
171