Dell PowerEdge M420 Reference Manual page 111

Command
vlan
vlan (Global Config)
vlan association mac
vlan association subnet
vlan database
vlan makestatic
vlan protocol group
vlan protocol group add
protocol
vlan protocol group name
vlan protocol group remove Removes the protocol-base VLAN group
vlan routing
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
802.1x
Command
dot1x dynamic-vlan enable Enables the capability of creating VLANs
dot1x initialize
dot1x mac-auth-bypass
dot1x max-req
Description
Creates a VLAN.
Configures a VLAN.
Associates a MAC address to a VLAN.
Associates an IP subnet to a VLAN.
Enters the VLAN database configuration mode. GC
Changes a dynamically created VLAN to a static
VLAN.
Adds protocol-based VLAN groups to the
system.
Adds a protocol to the protocol-based VLAN
groupid
identified by
Adds a group name to the protocol-based VLAN
groupid
identified by
groupid
identified by
Enable routing on a VLAN.
Description
dynamically when a RADIUS-assigned VLAN
does not exist in the switch.
Begins the initialization sequence on the
specified port.
Enables MAB on an interface.
Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
.
.
.
Command Groups
a
Mode
VLAN
GC
VLAN
VLAN
VLAN
GC
GC
GC
GC
PE
a
Mode
GC
PE
IC
IC
111