Show Supported Cardtype; Show Supported Switchtype; Show Switch; Show System - Dell PowerEdge M420 Reference Manual

Command
set description
slot
show banner
show boot-version
show checkpoint
statistics
show cut-through mode Show the cut-through mode on the switch.
show interfaces
advanced firmware
show ip interface out-of-
band
show memory cpu
show nsf
show power-usage-
history
show process cpu
show sessions
show slot
show supported
cardtype
show supported
switchtype

show switch

show system

show system id

Description
Associates a text description with a switch in
the stack.
Configures a slot in the system.
Displays banner information.
Displays the boot image version details.
Displays the statistics for the checkpointing
process.
Displays the firmware revision of the PHY for a
port.
Disables DHCP/BOOTP on the OOB port.
Checks the total and available RAM space on
the switch.
Shows non-stop forwarding status.
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
Checks the CPU utilization for each process
currently running on the switch.
Displays a list of the open telnet sessions to
remote hosts.
Displays information about all the slots in the
system or for a specific slot.
Displays information about all card types
supported in the system.
Displays information about all supported switch
types.
Displays information about the switch status.
Displays system information.
Displays the service ID information.
Mode
SG
GC
PE
UE
PE
PE
PE
PE
PE
PE
PE
PE
PE
UE
UE
UE
UE
UE
UE
Command Groups
a
157