Dell PowerEdge M420 Reference Manual page 114

Command
arp purge
arp resptime
arp retries
arp timeout
clear arp-cache
clear arp-cache
management
ip local-proxy-arp
ip proxy-arp
show arp
show arp brief
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
DHCP Server and Relay Agent (IPv4)
Command
ip dhcp pool
bootfile
clear ip dhcp binding
clear ip dhcp conflict
client-identifier
client-name
114
Command Groups
Description
Causes the specified IP address to be removed
from the ARP cache.
Configures the ARP request response timeout.
Configures the ARP count of maximum request
for retries.
Configures the ARP entry age-out time.
Removes all ARP entries of type dynamic from
the ARP cache.
Removes all entries from the ARP cache learned
from the management port.
Enables proxying of ARP requests.
Enables proxy ARP on a router interface.
Displays the Address Resolution Protocol (ARP)
cache.
Displays the brief Address Resolution Protocol
(ARP) table information.
Description
Defines a DHCP address pool that can be used
to supply addressing information to DHCP
client. This command puts the user into DHCP
Pool Configuration mode.
Sets the name of the image for the DHCP
client to load.
Removes automatic DHCP server bindings.
Removes DHCP server address conflicts.
Identifies a a Microsoft DHCP client to be
manually assigned an address.
Specifies the host name of a DHCP client.
a
Mode
PE
GC
GC
GC
PE
PE
IC
IC
PE
PE
a
Mode
GC
DP
PE
PE
DP
DP