Dell PowerEdge M420 Reference Manual page 178

Table 2-5. Navigating CLI Command Modes
Command Mode
User EXEC
Privileged EXEC Use the enable
Global
Configuration
Line Interface
Management
Access-List
178
Using the CLI
Access Method
The user is
automatically in
User EXEC mode
unless the user is
defined as a
privileged user.
command to enter
into this mode. This
mode is password
protected.
From Privileged
EXEC mode, use
the configure
command.
From Global
Configuration
mode, use the line
command.
From Global
Configuration
mode, use the
management
access-list
command.
Command Prompt
console>
console#
console(config)#
console(config-line)#
console(config-macal)#
Exit or Access
Previous Mode
logout
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
User EXEC
mode.
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
Privileged EXEC
mode.
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.