Command Line Configuration Scripting Commands - Dell PowerEdge M420 Reference Manual

Command Line Configuration Scripting
Command
script apply
script delete
script list
script show
script validate
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Configuration and Image Files
Command
boot system
clear config
copy
delete backup-image
delete backup-config
delete startup-config
dir
erase
filedescr
rename
show backup-config
show bootvar
show running-config
show startup-config
Description
Applies commands in the script to the switch.
Deletes a specific script.
Lists all scripts present in the switch.
Displays the contents of a script file.
Validates a script file.
Description
Specifies the system image that the switch loads
at startup.
Restores switch to default configuration.
Copies files from a source to a destination.
Deletes a file from a flash memory.
Deletes the backup configuration file.
Deletes the startup configuration file.
Prints the contents of the flash file system.
Erases the startup configuration, the backup
configuration, or the backup image.
Adds a description to a file.
Renames the file present in flash.
Displays contents of a backup configuration
file.
Displays the active system image file that the
switch loads at startup.
Displays the contents of the currently running
configuration file.
Displays the startup configuration file contents. PE
Command Groups
a
Mode
PE
PE
PE
PE
PE
a
Mode
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
UE
PE
145