Captive Portal - Dell PowerEdge M420 Reference Manual

Command
boot host retrycount
show auto-copy-sw
show boot
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Captive Portal

Command
authentication timeout
captive-portal
enable
http port
https port
show captive-portal
show captive-portal status
block
configuration
enable
group
interface
locale
Description
Set the number of attempts to download a
configuration.
Displays Stack Firmware Synchronization
configuration status.
Displays the current status of the Auto Config
process.
Description
Configures the authentication timeout.
Enables the captive portal configuration mode. GC
Globally enables captive portal.
Configures an additional HTTP port for captive
portal to monitor.
Configures an additional HTTPS port for
captive portal to monitor.
Displays the status of captive portal.
Reports the status of all captive portal instances
in the system.
Blocks all traffic for a captive portal
configuration.
Enables the captive portal instance mode.
Enables a captive portal configuration.
Configures the group number for a captive
portal configuration.
Associates an interface with a captive portal
configuration.
Associates an interface with a captive portal
configuration.
Command Groups
a
Mode
GC
PE
PE
a
Mode
CP
CPI
CP
CP
PE
PE
CPI
CP
CPI
CPI
CPI
CPI
141