Dell PowerEdge M420 Reference Manual page 152

Command
debug mldsnooping
debug ospf
debug ospfv3
debug ping
debug rip
debug sflow
debug spanning-tree
debug vrrp
show debugging
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
sFlow
Command
sflow destination
sflow polling
sflow polling (Interface
Mode)
sflow sampling
sflow sampling (Interface
Mode)
show sflow agent
show sflow destination
152
Command Groups
Description
Traces MLD snooping packet reception and
transmission.
Enables tracing of OSPF packets received and
transmitted by the switch.
Enables tracing of OSPFv3 packets received and
transmitted by the switch.
Enables tracing of ICMP echo requests and
responses.
Enables tracing of RIP requests and responses.
Enables sFlow debug packet trace.
Traces spanning tree BPDU packet reception
and transmission.
Enables VRRP debug protocol messages.
Displays packet tracing configurations.
Description
Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Displays the sflow agent information.
Displays all the configuration information
related to the sFlow receivers.
a
Mode
PE
PE
PE
PE
PE
PE
PE
PE
PE
a
Mode
GC
GC
IC
GC
IC
PE
PE