Show Snmp; Show Snmp Engineid; Show Snmp Filters - Dell PowerEdge M420 Reference Manual

Command
show sflow polling
show sflow sampling
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
SNMP
Command

show snmp

show snmp engineID

show snmp filters

show snmp group
show snmp user
show snmp views
show trapflags
snmp-server community
snmp-server community-
group
snmp-server contact
snmp-server enable traps
snmp-server engineID local Specifies the Simple Network Management
snmp-server filter
snmp-server group
snmp-server host
snmp-server location
Description
Displays the sFlow polling instances created on
the switch.
Displays the sFlow sampling instances created
on the switch.
Description
Displays the SNMP status.
Displays the SNMP engine ID.
Displays the configuration of filters.
Displays the configuration of groups.
Displays the configuration of users.
Displays the configuration of views.
Displays SNMP traps globally or displays
specific SNMP traps.
Sets up the community access string to permit
access to SNMP protocol.
Maps SNMP v1 and v2 security models to the
group name.
Sets up a system contact (sysContact) string.
Enables SNMP traps globally or enables specific
SNMP traps.
Protocol (SNMP) engine ID on the local switch.
Creates or updates an SNMP server filter entry. GC
Configures a new SNMP group or a table that
maps SNMP users to SNMP views.
Specifies the recipient of SNMP notifications.
the system location string.
Sets
Command Groups
a
Mode
PE
PE
a
Mode
PE
PE
PE
PE
PE
PE
PE
GC
GC
GC
GC
GC
GC
GC
GC
153