Dell PowerEdge M420 Reference Manual page 130

Command
area virtual-link
retransmit-interval
area virtual-link
transmit-delay
auto-cost
bandwidth
capability opaque
clear ip ospf
compatible rfc1583
default-information
originate
default-metric
distance ospf
distribute-list out
enable
exit-overflow-interval
external-lsdb-limit
ip ospf area
ip ospf authentication
ip ospf cost
ip ospf dead-interval
130
Command Groups
Description
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
Allows user to change the reference bandwidth
used in computing link cost.
Allows user to change the bandwidth used in
computing link cost.
Enables Opaque Capability on the router.
Resets specific OSPF states.
Enables OSPF 1583 compatibility.
Controls the advertisement of default routes.
Sets a default for the metric of distributed routes. ROSPF
Sets the route preference value of OSPF in the
router.
Specifies the access list to filter routes received
from the source protocol.
Resets the default administrative mode of OSPF
in the router (active).
Configures the exit overflow interval for OSPF.
Configures the external LSDB limit for OSPF.
Enables OSPFv2 and sets the area ID of an
interface.
Sets the OSPF Authentication Type and Key for
the specified interface.
Configures the cost on an OSPF interface.
Sets the OSPF dead interval for the specified
interface.
a
Mode
ROSPF
ROSPF
ROSPF
IC
RC
PE
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
IC
IC
IC
IC