Dell PowerEdge M420 Reference Manual page 109

TACACS+
Command
key
port
priority
show tacacs
tacacs-server host
tacacs-server key
tacacs-server timeout
timeout
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
VLAN
Command
dvlan-tunnel ethertype
interface vlan
interface range vlan
mode dvlan-tunnel
name
protocol group
protocol vlan group
Description
Specifies the authentication and encryption key
for all TACACS communications between the
device and the TACACS server.
Specifies a server port number.
Specifies the order in which servers are used.
Displays TACACS+ server settings and
statistics.
Specifies a TACACS+ server host.
Sets the authentication and encryption key for
all TACACS+ communications between the
switch and the TACACS+ daemon.
Sets the interval for which the switch waits for a
server host to reply.
Specifies the timeout value in seconds.
Description
Configures the EtherType for the interface.
Enters the interface configuration (VLAN)
mode.
Enters the interface configuration mode to
configure multiple VLANs.
Enables Double VLAN tunneling on the
specified interface.
Configures a name to a VLAN.
vlanid
Attaches a to the protocol-based VLAN
groupid
identified by
Adds the physical unit/slot/port interface to the
protocol-based VLAN identified by
.
groupid
Command Groups
a
Mode
TC
TC
TC
PE
GC
GC
GC
TC
a
Mode
GC
GC
GC
IC
IC
VLAN
IC
.
109