Traceroute; Upload; Username - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide

traceroute

EXEC command. Network diagnostic tool traceroute. Invokes standard binary, passing
command line arguments straight through.
traceroute [<options>] {<hostname>}

upload

Upload files.
upload
accesslog {current | all} {<SCP> | <SFTP>}
cachelog {current | all}
errorlog {current | all} {<URL> | <SCP>}
fmsaccesslog all {<URL> | <SCP>}
fmsedgelog all {<URL> | <SCP>}
fuselog {current | all} {<URL> | <SCP>}
object list <namespace>
streamlog {current | all} {<URL> | <SCP>}
tracelog {current | all}
Upload either the current or all accesslog, cachelog, errorlog, streamlog, delivery tracelog,
or
namespace
also use SFTP. With the errorlog, you can also use an HTTP URL. See the
page 30 for the scp and sftp URL format and requirements. To set up SSH, used by SFTP,
see "Using SSH in Automated Scripts (CLI)" on page

username

Configure user accounts and privileges. See
Options" on page 67
username <username>
capability <capability>
disable [password]
full-name <name>
nopassword
password [ 0 <cleartext_password> | 7 <encrypted_password> |
<cleartext_password>]
Add or delete (with no) a user account. New users are created initially with admin privileges
and you must manually change those privileges, if desired. To enable a user account, just set
a password on it (or use the nopassword command to enable it with no password required for
login). Removing a user account does not terminate any current sessions that user has open;
it just prevents new sessions from being established.
Notes:
•
capability <capability>
account if it does not exist. Use no to revert the specified user to the default capability,
which is admin privileges. There are three pre-defined capabilities:
{<URL> | <SCP>}
{<URL> | <SCP>}
{<URL> | <SCP>}
<name> object list file, to the specified SCP path. With the accesslog, you can
for task details.
—Change the capabilities for this user account. Creates the
Media Flow Controller CLI Commands
208.
"Authentication / Authorization and Users
"Terminology" on
traceroute 371