6800 Group Mobility Troubleshooting; Show Vlan Rules; Gmhelp - Alcatel OmniSwitch 6624 Troubleshooting Manual

Troubleshooting Group Mobility

6800 Group Mobility Troubleshooting

The following commands and debugging functions are available for troubleshooting Group Mobility on
the NI. A summary is shown below.

show vlan rules

•

gmHelp

•
gmcKiteDebug
•
gmcShowPorts
•
gmcShowRules
•
gmnKiteDebug
•
gmnKiteShowRules
•
gmnMacVlanShowBuffer
•
show vlan rules
SW_2T19-> show vlan rules
Legend: type: * = binding rule
type
-----------------+------+-------------------------------------------------------
ip-net
ip-net
ip-net
dhcp-port
dhcp-port
dhcp-port
dhcp-port
gmHelp
Working: [Kernel]->gmHelp
***************************************************
Group Mobility Help for CMM
***************************************************
'gmcKiteDebug = 1' must be done in order to see the outputs on below debug
commands.
It also enables the real time debugger. To disable 'gmcKiteDebug = 0'.
gmcShowPorts ---------------Displays all the ports in the system
gmcShowMipTables -----------Displays all MIP tables used
gmcShowRules (GmcRuleType) -Displays all rules of specified type
gmcShowPiMap ---------------Displays Protocol Indicator Map
gmcShowConnections ---------Displays connections with all CMM interfaces
gmcShowNiConnections -------Displays connections with all NI interfaces
gmcMacVlanShowBuffer (int type) - If type=0, display macvlan_sw malloc counter only
gmcDebugKiteShowCML (int slot) -- Display CML setting at CMM
OmniSwitch Troubleshooting Guide
vlan rule
9 166.24.9.0, 255.255.255.0
104 166.24.104.0, 255.255.248.0
112 166.24.112.0, 255.255.248.0
104 1/1
104 1/2
104 1/3
104 1/4
- If type=1, display above and macvlan_sw table
September 2005
6800 Group Mobility Troubleshooting
page 9-7