Vlan Specifications; Vlan Defaults - Alcatel OmniSwitch 6624 Network Configuration Manual

VLAN Specifications

VLAN Specifications
RFCs Supported
IEEE Standards Supported
Maximum VLANs per stack
Maximum VLAN port associations per stack 32768
Maximum IP router port VLANs per stack
Maximum IPX router port VLANs per stack
Maximum authenticated VLANs per stack
MAC Router Mode Supported
CLI Command Prefix Recognition

VLAN Defaults

Parameter Description
VLAN identifier (VLAN ID)
VLAN administrative state
VLAN description
VLAN Spanning Tree state
VLAN mobile tag status
VLAN IP router port
VLAN IP router MTU size
VLAN authentication status
VLAN port associations
page 4-2
2674 - Definitions of Managed Objects for Bridges
with Traffic Classes, Multicast Filtering and Virtual
LAN Extensions
802.1Q - Virtual Bridged Local Area Networks
802.1D - Media Access Control Bridges
4094 (including default VLAN 1)
4094
0 (IPX routing not supported in this release)
128
Single
All VLAN management commands support prefix
recognition. See the "Using the CLI" chapter in the
OmniSwitch 6624/6648 Switch Management Guide
for more information.
Command
vlan
vlan
vlan name
vlan stp
vlan mobile-tag
vlan router ip
vlan mtu-ip
vlan authentication
vlan port default
OmniSwitch 6624/6648 Network Configuration Guide
Configuring VLANs
Default
VLAN 1 predefined on each
switch.
Enabled
VLAN identifier (VLAN ID)
Enabled
Disabled
No router port defined.
1500 bytes
Disabled
All ports initially associated
with default VLAN 1.
April 2004