Remote Monitoring (Rmon); Rmon Specifications - Alcatel OmniSwitch 6624 Network Configuration Manual

Diagnosing Switch Problems

Remote Monitoring (RMON)

The following sections detail the specifications, defaults, and quick set up steps for the RMON feature.
Detailed procedures are found in

RMON Specifications

RFCs Supported
RMON Functionality Supported
RMON Functionality Not Supported
Flavor (Probe Type)
Status
History Control Interval (seconds)
History Sample Index Range
Alarm Interval (seconds)
Alarm Startup Alarm
Alarm Sample Type
RMON Traps Supported
OmniSwitch 6624/6648 Network Configuration Guide
"Remote Monitoring (RMON)" on page
2819 - Remote Network Monitoring
Management Information Base
Basic RMON 4 group implementation
–Ethernet Statistics group
–History (Control and Statistics) group
–Alarms group
–Events group
RMON 10 group*
RMON2*
–Host group
–HostTopN group
–Matrix group
–Filter group
–Packet Capture group
(*An external RMON probe that includes
RMON 10 group and RMON2 may be used
where full RMON probe functionality is
required.)
Ethernet/History/Alarm
Active/Creating/Inactive
1 to 3600
1 to 65535
1 to 2147483647
Rising Alarm/Falling Alarm/
RisingOrFalling Alarm
Delta Value/Absolute
RisingAlarm/FallingAlarm
These traps are generated whenever an Alarm
entry crosses either its Rising Threshold or its
Falling Threshold and generates an event con-
figured for sending SNMP traps.
April 2004
Remote Monitoring (RMON)
24-16.
page 24-5