Configuring Mobile Port Properties; Enable/Disable Default Vlan - Alcatel OmniSwitch 6624 Network Configuration Manual

Understanding Mobile Port Properties

Configuring Mobile Port Properties

Mobile port properties indicate mobile port status and affect port behavior when the port is dynamically
assigned to one or more VLANs. For example, mobile port properties determine the following:
Should the configured default VLAN forward or discard port traffic that does not match any VLAN
•
rule criteria.
Should the port retain or drop a dynamic VPA when traffic that triggered the assignment stops and the
•
source MAC address learned on the port for that VLAN is aged out. (See
Learning," for more information about the aging of MAC addresses.)
Will the mobile port participate in Layer 2 authentication that provides a login process at the VLAN
•
and/or port level. (See
ing 802.1X," for more information.).
This section contains procedures for using the following commands to configure mobile port properties.
For more details about the syntax of commands, see the OmniSwitch CLI Reference Guide.
Command
vlan port default vlan
vlan port default vlan restore
vlan port authenticate
vlan port 802.1x
Use the show vlan port mobile
mobile ports. See "Verifying VLAN Port Associations and Mobile Port Properties" on page 6-19
information.

Enable/Disable Default VLAN

To enable or disable forwarding of mobile port traffic that does not match any VLAN rules on the port's
configured default VLAN, enter vlan port followed by the port's slot/port designation then default vlan
followed by enable or disable. For example,
-> vlan port 3/1 default vlan enable
-> vlan port 5/2 default vlan disable
To enable or disable the configured default VLAN on multiple ports, specify a range of ports and/or multi-
ple slots.
-> vlan port 2/1-12 3/10-24 4/3-14 default vlan enable
Note. It is recommended that mobile ports with their default VLAN disabled should not share a VLAN
with any other types of ports (e.g., mobile ports with default VLAN enabled or non-mobile, fixed ports).
See "Understanding Mobile Port Properties" on page 6-13
property affects mobile port behavior.
page 6-16
Chapter 18, "Configuring Authenticated VLANs,"
Description
Enables or disables forwarding of mobile port traffic on the port's con-
figured default VLAN that does not match any existing VLAN rules.
Enables or disables the retention of VLAN port assignments when
mobile port traffic ages out.
Enables or disables authentication on a mobile port.
Enables or disables 802.1X port-based access control on a mobile port.
command to view the current status of these properties for one or more
OmniSwitch 6624/6648 Network Configuration Guide
Assigning Ports to VLANs
Chapter 2, "Managing Source
and Chapter 19, "Configur-
for an overview and illustrations of how this
for more
April 2004