Configuring Chassis Slot, Iom, And Mda Parameters - Alcatel 7450 ESS-7 Installation Manual

Configuring Chassis Slot, IOM, and MDA Parameters

C
ONFIGURING
After the SF/CPM is installed, chassis slots, IOMs, and MDAs can be preconfigured prior to the
component installation or configured after the components are installed. Each specific slot must
specify an IOM, MDA slot, and MDA type. Ports cannot be configured until the MDA is
configured.
Preprovision components in the following order:
C C
ONFIGURING
In the
provision the chassis slot and IOM:
Step 1
Step 2
Step 3
Page 94
C S
HASSIS LOT
1. Chassis slot number
2. Card type
3. MDA slot number
4. MDA type
5. Ports
S
HASSIS LOT AND
context, use the following CLI commands and syntax examples to
config>card
Command
card slot-number
card-type card-type
no shutdown
, IOM, MDA P
AND
IOM P
ARAMETERS
Example
card 1
card-type iom-20g
no shutdown
ARAMETERS
7450 ESS-7