Enable/Disable 802.1X Port-Based Access Control - Alcatel OmniSwitch 6624 Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6624:

Table of Contents

Understanding Mobile Port Properties

Enable/Disable 802.1X Port-Based Access Control

To enable or disable 802.1X on a mobile port, enter vlan port followed by the port's slot/port designa-

tion then 802.1x followed by enable or disable. For example,

-> vlan port 3/1 802.1x enable

-> vlan port 5/2 802.1x disable

To enable or disable 802.1X on multiple ports, specify a range of ports and/or multiple slots.

-> vlan port 6/1-32 8/10-24 9/3-14 802.1x enable

-> vlan port 5/3-6 9/1-4 802.1x disable

Only mobile ports are eligible for 802.1X port-based access control. If enabled, the mobile port partici-

pates in the authentication and authorization process defined in the IEEE 802.1X standard and supported

by Alcatel switches. For more information, see

Chapter 19, "Configuring 802.1X."

OmniSwitch 6624/6648 Network Configuration Guide

Assigning Ports to VLANs

Omniswitch 6648