Display Time-Range - 3Com 5500-EI PWR Reference Manual

former case, the unit-id argument is in the range 1 to 8; in the latter case, the unit-id argument can only
be 1.
Description
Use the display packet-filter command to display information about packet filtering.
Examples
# Display information about packet filtering on all ports of a switch that is not in a fabric.
<Sysname> display packet-filter unitid 1
Ethernet1/0/1
Inbound:
Acl 2000 rule 0
Ethernet1/0/2
Outbound:
Acl 2001 rule 0
Table 1-3 Description on the fields of the display packet-filter command
Ethernet1/0/1
Inbound
Acl 2000 rule 0
running

display time-range

Syntax
display time-range { all | time-name }
View
Any view
Parameters
all: Displays all time ranges.
time-name: Name of a time range, a string of 1 to 32 characters that starts with a to z or A to Z.
running
not running
Field
Port on which packet filtering is performed
Direction of the packet filtering, Inbound or
Outbound.
ACL and its rule(s) applied
Status of the rule, which can be
running: The ACL rule is active.
not running: The ACL rule is inactive. Usually,
this is because the current time is out of the
rule's time range.
1-6
Description