Display Time-Range - 3Com Switch 4500 Family Manual

4500 series
Hide thumbs Also See for Switch 4500 Family:
Table of Contents

Advertisement

Description
Use the display packet-filter command to display information about packet filtering.
Examples
# Display information about packet filtering on all ports of a switch that is not in a fabric.
<Sysname> display packet-filter unitid 1
Ethernet1/0/1
Inbound:
Acl 2000 rule 0
Ethernet1/0/2
Outbound:
Acl 2001 rule 0
Table 1-3 Description on the fields of the display packet-filter command
Field
Ethernet1/0/1
Inbound
Acl 2000 rule 0
running

display time-range

Syntax
display time-range { all | time-name }
View
Any view
Parameters
all: Displays all time ranges.
time-name: Name of a time range, a string of 1 to 32 characters that starts with a to z or A to Z.
Description
Use the display time-range command to display the configuration and status of a time range or all the
time ranges. For active time ranges, this command displays "Active"; for inactive time ranges, this
command displays "Inactive".
Related commands: time-range.
running
not running
Port on which packet filtering is performed
Direction of the packet filtering, Inbound or Outbound.
ACL and its rule(s) applied
Status of the rule, which can be
running: The ACL rule is active.
not running: The ACL rule is inactive. Usually, this is because
the current time is out of the rule's time range.
Description
1-6

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 26-port4500 50-port4500 pwr 26-port

Table of Contents