Display Time-Range - 3Com 8807 Command Reference Manual

ACL Commands 219
slot slotid: Displays the flow template applied on the specified card.
user-defined: Displays the user-defined flow template.
Description
Use the display flow-template command to view the detailed configuration of
flow template. The configuration includes which parameters the flow template
defines and which ports/cards is the flow template applied on.
3Com Switch 8800 Family Series Routing Switches (hereinafter referred to as
Switch 8800 Family series) support two flow templates: one is user-defined; the
other is the default one. If you do not input any parameter for this command, the
detailed configuration of all flow templates will be displayed.
Related command: flow-template user-defined.
Example
# Display information about the default flow-template.
<SW8800> display flow-template default
default flow template : ip-protocol tcp-flag sport dport icmp-type
icmp-code sip 0.0.0.0 dip 0.0.0.0 vlanid

display time-range

Syntax
display time-range { all | name }
View
Any view
Parameter
all: Displays all time ranges.
name: Time range name, string starting with an English letter ([a-z, A-Z]) and in
the range of 1 to 32 characters.
Description
Use the display time-range command to view the configuration and status of
current time range. For active time range, the system shows "active" and
"inactive" for inactive time range.
A delay, about one minute, exists in system's updating ACLs, but the result of the
display time-range command is based on the current time. Then there may the
case where a time range have been shown active using the display time-range
command, while it is still inactive in importing the ACL. You just take it as a normal
case.
Related command: time-range.
Example
# Display all time ranges.
<SW8800> display time-range all
Current time is 14:36:36 4-3-2003 Thursday