Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Installation position of gasket between exhaust gas cleaning mod‐
ule and pre-exhaust pipe
•
The square catch of the gasket -arrow- must be in the groove
of the exhaust gas cleaning module.
Installation position of clamping sleeve for pre-exhaust pipe
•
Angle -α- = 0 ± 30°.
Installation position of front clamp
– Install clamping sleeve in the angle position shown.
•
Angle -α- = approximately 50°.
•
Bolted connection to the right.
•
Nuts upwards.
1.2
Removing and installing exhaust pipe
Removing
– Remove tunnel cover at bottom ⇒ Body Work; Rep. gr. 50 .
For vehicles with engine identification characters CLHA, CLHB,
CRKB, CKFB, CKFC, CUPA, CRMB, CUNA
– Separate electrical plug connection -1-.
Continued for all vehicles
– Slacken the clamping sleeve -2- and slide it backwards.
380
Rep. gr.26 - Exhaust system