Skoda Octavia III 2013 Workshop Manual page 276

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Lift the closing flange -3- carefully out of the fuel tank opening.
– Remove gasket ring -1- from fuel tank opening.
– Pull closing flange with fuel line -2- carefully out of the fuel tank
opening.
Note
When removing the fuel delivery unit, ensure that you do not bend
the float arm of the sender for the fuel gauge display.
– Reach into the fuel tank through the opening, remove the drive
jet line -1-, while doing so, press the release at the connection
⇒ "2.12 Separating push-on couplings", page 249
– Remove the pressure line for the suction jet pump from the
fuel delivery unit, to do so press catches -2- and -3- and re‐
move the cable.
Vehicles fitted with auxiliary heating
– Pull sealing flange -1- slightly out of the fuel tank opening.
– Remove gasket ring -2- from fuel tank opening.
– Pull closing flange with fuel line and electrical lines carefully
out of the fuel tank opening as far as possible.
Note
When removing the fuel delivery unit, ensure that you do not bend
the float arm of the sender for the fuel gauge display.
– Reach into the fuel tank through the opening, unlock the de‐
livery unit from the locking mechanisms -2- and -3- and re‐
move from the fuel delivery unit.
268
Rep. gr.20 - Fuel supply system
.