Radiator And Radiator Fan; Parts Of The Cooling System Fitted To Body - Skoda Octavia III 2013 Workshop Manual

4

Radiator and radiator fan

⇒ "4.1 Parts of the cooling system fitted to body", page 185
⇒ "4.2 Summary of components - fan shroud and radiator fan V7
", page 190
⇒ "4.3 Summary of components- fan shroud and radiator fan V7
and radiator fan 2 V177 ", page 191
⇒ "4.4 Removing and installing radiator", page 191
⇒ "4.5 Removing and installing fan shroud", page 195
⇒ "4.6 Removing and installing radiator fans V7 and V177 ", page
196
4.1

Parts of the cooling system fitted to body

⇒ "4.1.1 Radiator version 1", page 185
⇒ "4.1.2 Radiator version 2", page 187
⇒ "4.1.3 Radiator version 3", page 188
4.1.1 Radiator version 1
1 - Coolant radiator
❑ removing and installing
⇒ "4.4 Removing and in‐
stalling radiator",
page 191
❑ fill with fresh coolant af‐
ter replacing
2 - Coolant hose
❑ to remove, raise holding
clamps
❑ connect ⇒ page 186
3 - Not installed
4 - Not installed
5 - Not installed
6 - O-ring
❑ replace after removal
❑ Moisten with coolant
7 - Coolant hose
❑ to remove, raise holding
clamps
❑ connect ⇒ page 186
8 - O-ring
❑ replace after removal
❑ Moisten with coolant
9 - Coolant hose
❑ to remove, raise holding
clamps
❑ connect ⇒ page 186
10 - Radiator bearing
❑ if the fuse breaks, re‐
place it with a special screw, see ⇒ ETKA - Electronic Catalogue of Original Parts
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
4. Radiator and radiator fan
185