Skoda Octavia III 2013 Workshop Manual page 249

– Install new gasket ring -1- for closing flange while dry.
– Coat inner side of gasket ring -1- with fuel.
– Insert fuel delivery unit with sender for fuel gauge display - G-
carefully through the fuel tank opening.
– Press down the closing flange against the spring force and
bring it into the installation position.
– The peg -2- at the closing flange -1- must be located against
arrow -3- at the fuel tank.
Caution
Risk of leakage.
♦ The gasket ring must not get damaged or squashed when
inserting the sealing flange.
Note
Ensure that the fuel delivery unit is not damaged when tightening
the lock ring of the holder on the flange.
– Insert lock ring and tighten using the wrench - T30101 (3087)- .
– Fit fuel lines -1- and -2- so that they can be heard clicking into
place.
– If present, install the fuel line -3- for the dosing pump of the
auxiliary heating - V54- at the closing flange ⇒ Heating, Air
Conditioning; Rep. gr. 82 .
– Press fuel lines down again and check by pulling that the plug-
in connector is fully engaged.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
241