Skoda Octavia III 2013 Workshop Manual page 195

4.1.2 Radiator version 2
1 - Coolant radiator
❑ removing and installing
⇒ "4.4 Removing and in‐
stalling radiator",
page 191
❑ fill with fresh coolant af‐
ter replacing
2 - Coolant hose
❑ to remove, raise holding
clamps
❑ connect ⇒ page 188
3 - O-ring
❑ replace after removal
❑ Moisten with coolant
4 - Coolant hose
❑ to remove, raise holding
clamps
❑ connect ⇒ page 188
5 - O-ring
❑ replace after removal
❑ Moisten with coolant
6 - Cooler for charge air circuit
❑ removing and installing
⇒ "4.4 Removing and in‐
stalling radiator",
page 191
7 - Radiator bearing
❑ if the fuse breaks, re‐
place it with a special
screw, see ⇒ ETKA -
Electronic Catalogue of
Original Parts
8 - Condenser
❑ removing and installing ⇒ Heating, Air Conditioning; Rep. gr. 87
9 - Rubber bearing
❑ for radiator
10 - O-ring
❑ replace after removal
❑ Moisten with coolant
11 - Coolant hose
❑ to remove, raise holding clamps
❑ connect ⇒ page 188
12 - O-ring
❑ replace after removal
❑ Moisten with coolant
13 - Coolant hose
❑ to remove, raise holding clamps
❑ connect ⇒ page 188
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
4. Radiator and radiator fan
187