Skoda Octavia III 2013 Workshop Manual page 297

– Disconnect electrical plug connections -2- on the accelerator
pedal module, thereby pressing the release upwards.
– Release screw -1-.
– Remove accelerator module -3- from the uptake.
Install
Installation is performed in the reverse order, pay attention to the
following points:
Caution
Risk of damage to knee airbag surface by mechanical stress.
♦ After completion of assembly work with visual inspection,
check that the knee airbag surface is not damaged.
Tightening torque
♦ ⇒ "3.1 Assembly overview - accelerator module ", page 288
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
3. Accelerator mechanism
289