Skoda Octavia III 2013 Workshop Manual page 161

– Raise holding clamps -1-, -2-, remove coolant hoses from
charge air circuit cooler, allow coolant to drain.
Continued for all vehicles
– Loosen hose clamp -arrow-, remove bottom coolant hose to
heating backup pump - V488- , allow coolant to drain.
Filling up
Caution
Risk of engine damage if the cooling system is not filled/bled
correctly.
After filling, the cooling system must be bled ⇒ Vehicle diag‐
nostic tester.
Work procedure
Vehicles with radiator version 1
– Connect coolant hose with quick coupling -arrow- to radiator
bottom left ⇒ page 186
– Connect coolant hose with quick coupling -arrow- to charge
air circuit cooler bottom right
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
⇒ page 186 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
153
1. Cooling system