Draining And Filling Coolant - Skoda Octavia III 2013 Workshop Manual

❑ The fitting position is not defined, therefore the coolant hose must not be unclipped with the hose clamp
(Risk of damage!)
14 - Coolant connection
15 - Gearbox oil cooler
❑ Equipment variants
16 - Coolant thermostat
17 - Engine oil cooler
18 - Coolant radiator
❑ fill with fresh coolant after replacing
19 - Throttle valve module - J338-
20 - EGR control motor - V338-
21 - Charge air cooler pump - V188-
1.2

Draining and filling coolant

Special tools and workshop equipment required
♦ Adapter for cooling system tester - V.A.G 1274/8-
♦ Cooling system charge unit - VAS 6096-
♦ Catch pan , e.g. -VAS 6208-
♦ Hose clip pliers - VAS 6362-
♦ Refractometer
♦ Protective goggles
♦ Protective gloves
Draining
WARNING
Hot steam or hot coolant may escape when the compensation
bottle is opened. Cover the cap with a cloth and open carefully.
– Open cap -arrow- for coolant expansion tank.
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Place a catch pan - VAS 6208- under the radiator.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
151
1. Cooling system