Skoda Octavia III 2013 Workshop Manual page 275

– Push up catch -2- in arrow direction -A- - to do so, reach be‐
tween bottom plate and fuel tank with a finger..
– At the same time, carefully pull the fuel pump control unit -
J538- -1- carefully at the electrical wiring loom -3- out of the
uptake in arrow direction -B-.
– Take out fuel pump control unit - J538- inwards between fuel
tank and bottom plate.
– Expose the fuel pump control unit - J538- together with the
electrical wiring harness.
– Remove the fuel lines -1-, -2- from the closing flange, to do so
press the release button
⇒ "2.12 Separating push-on couplings", page 249
Vehicles fitted with auxiliary heating
– Remove fuel line -3- to the dosing pump - V54- for the auxiliary
heating at the closing flange.
– To do so, open the bottom clamp.
– Carefully pull out fuel line -3-.
Continued for all vehicles
Note
Ensure that the fuel delivery unit is not damaged when loosening
and tightening the lock ring of the holder on the flange.
– Open lock ring with the wrench - T30101 (3087)- .
Vehicles without auxiliary heating system
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
2. Removing and installing parts of the fuel supply system
267