Skoda Octavia III 2013 Workshop Manual page 325

Electrical plug connections
1 - Solenoid valve for charge pressure control - N75-
2 - Exhaust gas temperature transmitter 4 - G648-
3 - Exhaust gas temperature transmitter 3 - G495-
4 - Exhaust gas temperature transmitter 2 - G448- for vehicles
with engine identification characters CRKB, CRMB, CUNA
5 - Lambda probe - G39-
6 - Air mass meter - G70-
Installation location of exhaust flap control unit - J883-
• in the pre-exhaust pipe
Removing and installing
⇒ "1.1 Summary of components - front, middle and rear silencer",
page 370 .
Installation location of coolant valve for cylinder head - N489-
• Pos. -1- top on coolant pump.
Removing and installing
⇒ "2.6 Removing and installing coolant valve for cylinder head
N489 ", page 165 .
1.1.2 Installation location overview - engine from left
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
1. Diesel direct injection system - fitting location, system overview
Octavia III 2013 ➤ , Octavia III 2014 ➤
317