Skoda Octavia III 2013 Workshop Manual page 144

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Disconnect electrical plug connection -arrow- at the oil level
and temperature transmitter - G266- .
– Loosen clips -arrows-, remove noise insulation -1- for oil sump.
– Screw out screws -arrows- of oil pan/gearbox.
– Loosen bolts -1 ... 18- crosswise and release.
– Loosing oil sump carefully from the bonding.
Note
A vehicle with manual gearbox 02Q is shown as an example.
Install
Installation is performed in the reverse order, pay attention to the
following points:
Caution
Risk of contamination of the lubrication system and bearing.
Cover opened engine parts.
WARNING
Wear protective gloves when working with sealant and grease
remover!
– Remove residual sealant from the sealing surfaces on the cyl‐
inder block and on the oil pan with chemical sealant remover.
– Degrease the sealing surfaces.
136
Rep. gr.17 - Lubrication