Skoda Octavia III 2013 Workshop Manual page 280

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Fit the suction jet pump to the fuel gauge sender 2 - G169- ,
to do so, bend the retaining lugs -arrows- one after the other,
and insert the suction jet pump.
– Check for firm seating by pulling in the opposite direction.
– Insert dry gasket ring of the fuel delivery unit into the opening
of the fuel tank.
Note
When inserting the fuel delivery unit and fuel gauge sender 2 -
G169- , ensure that the float arm of the fuel gauge sender is not
bent.
– Coat inner side of gasket rings -1- with fuel.
– Push closing flange -2- downwards against spring force on
both sides.
– Bring the two closing flanges -2- into the fitting position.
– Arrow -3- at the fuel tank must point to marking -2- on the
closing flange -1-.
Caution
Risk of leakage.
♦ The gasket ring must not get damaged or squashed when
inserting the sealing flange.
Note
Ensure that the fuel delivery unit is not damaged when tightening
the lock ring of the holder on the flange.
272
Rep. gr.20 - Fuel supply system