Skoda Octavia III 2013 Workshop Manual page 58

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Remove crankshaft-belt pulley
⇒ "1.3 Removing and installing crankshaft-belt pulley",
page 40 .
Caution
Risk of destruction as a result of the toothed belt pulley jump‐
ing.
♦ Only rotate the crankshaft in the direction of rotation of the
engine!
– Turn the crankshaft at the screw for toothed belt pulley until
the camshaft toothed belt pulley is positioned on "TDC".
– Lock hub of the camshaft using the diesel injection pump rig
pin - 3359- ; to do so, insert the rig pin into fork -2- of the driver
and into the bore behind it -1- in the cylinder head.
– Loosen fixing screw -1- in the camshaft sprocket by half a turn
but do not release it.
– Lock the crankshaft toothed belt pulley using the crankshaft
arrester - T10490- .
• The studs of the crankshaft arrester - T10490- must reach into
the threaded bores of the toothed belt pulley.
• The rig pin of the crankshaft arrester - T10490- must reach into
the bores at the sealing flange.
Caution
Risk of engine damage.
♦ The diesel injection pump rig pin - 3359- must not be used
as a counterholder for loosening the camshaft toothed belt
pulley.
50
Rep. gr.13 - Crankshaft group