Skoda Octavia III 2013 Workshop Manual page 398

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
❑ removing and installing
25 - Screw
❑ Tightening torque and tightening order
Installation position of gripper clamp for exhaust gas cleaning
module
• Angle -α- = 30°.
Bracket -2- for exhaust gas cleaning module - tightening torques
and tightening order
– Tighten screws in steps in the specified sequence:
Stage Screws
1. -3-
2. -1-
3. -3-
390
Rep. gr.26 - Exhaust system
⇒ "2.2 Removing and installing exhaust gas cleaning module", page 392
⇒ page 398
Tightening torque
by hand as far as the stop
20 Nm
20 Nm