Skoda Octavia III 2013 Workshop Manual page 118

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Lock hub of the camshaft using the diesel injection pump rig
pin - 3359- ; to do so, insert the rig pin into fork -2- of the driver
and into the bore behind it -1- in the cylinder head.
– Disconnect the electrical plug connection -2- from the injection
unit for cylinder 1.
– On the cylinder head cover, unlock and remove screw plug
-1- by turning it to the left.
– Lock the inlet camshaft with rig pin - T10492- . Please note the
following when doing so:
The cylinder head cover -1- is installed:
• The distance -a- is approx. 1 mm.
110
Rep. gr.15 - Cylinder head, valve gear