Skoda Octavia III 2013 Workshop Manual page 55

– Open heat protection sleeve -1-.
– Disconnect electrical plug connection -3- and put the electric
cable to one side.
– Release screw -2-.
– Separate electrical plug connection -4-.
– Detach vacuum hose -arrow- and put to one side.
– Release screw -3-.
– Loosen hose clamps -1-, remove hoses.
– Lay pipelines -2- to one side.
Continued for all vehicles
– Unlock catches -arrows-, unhook and remove top toothed belt
guard -1-.
Install
Installation is performed in the reverse order, pay attention to the
following points:
– Venting air from the fuel system
⇒ "1.3 Filling/bleeding the fuel system", page 321
Tightening torques
♦ ⇒ "3.1 Summary of components - exhaust temperature regu‐
lation", page 402
♦ ⇒ "2.3 Fuel filter - Summary of components", page 217
♦ ⇒ "1.6 Summary of components - toothed belt guard",
page 42
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing a V-ribbed belt and a toothed belt
47