Skoda Octavia III 2013 Workshop Manual page 236

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Carefully lift out fuel delivery unit flange -3-.
– Remove gasket -1- and raise the fuel delivery unit flange
slightly higher.
Caution
Secure the earth cable of the fuel extraction device to a bare
metal part of the body.
– Insert suction hose of fuel extractor - VAS 5190- as far as
possible into fuel tank.
– Extract fuel using the fuel extraction device - VAS 5190- .
If fuel tank needs only to be emptied, re-install the fuel delivery
unit
⇒ "2.8 Removing and installing fuel delivery unit", page 232
Tightening torques
♦ ⇒ "2.2 Fuel delivery unit - Summary of components",
page 212
♦ ⇒ Heating, Air conditioning; Rep. gr. 82
2.7.4 Empty the fuel tank if less than
vehicles with four-wheel drive
Special tools and workshop equipment required
♦ Fuel extraction device , e. g. -VAS 5190-
♦ Wrench for union nut - T30101 (3087)-
♦ Disassembly wedge - 3409-
Caution
To prevent large quantities of fuel from leaking when removing
the fuel delivery unit, the fuel tank must not be filled to more
1
than a maximum of / 3 .
Note
Safety precautions when working on the fuel supply system
♦
⇒ "2 Safety instructions", page 3
Observe rules for cleanliness
♦
⇒ "3.1 Rules of cleanliness", page 6
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
228
Rep. gr.20 - Fuel supply system
/ 4 full,
3
.
.
.