Removing And Installing The Front Top Coolant Pipes - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
❑ removing and installing
18 - Screw
❑ 8 Nm
19 - Screw
❑ 8 Nm
3.2 Removing and installing the front top
coolant pipes
Special tools and workshop equipment required
♦ Hose clip pliers - VAS 6362-
Removing
– Remove engine cover
⇒ "1.1 Removing and installing engine trim panel", page 10
– Drain coolant ⇒ "1.2 Draining and filling coolant", page 151
– Unscrew screws -1-, -3-.
– Unlock catch -arrows-, remove cover-2-.
– Expose coolant hose -2-.
– Unlock catches -arrows-, remove top part-1- of air guide.
– Release screw left and right -arrow-.
– Unclip and remove bottom part -1- of air guide.
172
Rep. gr.19 - Cooling
⇒ "3.6 Remove and install the left coolant pipes", page 178
.
.