Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
4.6
Removing and installing radiator fans -
V7- and -V177-
Removing
Note
All cable straps should be fitted on again in the same place when
installing.
– Removing fan shroud
⇒ "4.5 Removing and installing fan shroud", page 195
For vehicles with a fan
– Expose electric cable.
– Unscrew screws -arrows-, remove - V7- radiator fan.
For vehicles with two fans
– Disconnect plug connection -arrow-.
– Remove screws -1- and remove the radiator fan - V7- .
– Unscrew screws -2- and radiator fan 2 - V177- .
Install
Installation is performed in the reverse order, pay attention to the
following points:
– Install fan shroud
⇒ "4.5 Removing and installing fan shroud", page 195
Tightening torques
♦
⇒ "4.2 Summary of components - fan shroud and radiator fan
V7 ", page 190
♦
⇒ "4.3 Summary of components- fan shroud and radiator fan
V7 and radiator fan 2 V177 ", page 191
196
Rep. gr.19 - Cooling
.
.