Skoda Octavia III 2013 Workshop Manual page 76

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Assembly of the assembly device - T10134-
A - Clamping surface
B - Hexagon nut
C - Assembly housing
D - Locating pin
E - Hexagon socket head bolt
F - Guide bolts (for diesel engines)
G - Guide bolts (for petrol engines)
A - Mounting sealing flange with rotor on the assembly tool -
T10134-
– Screw on hexagon nut -B- until just before it touches the
clamping surface -A- of the threaded spindle.
– Grip assembly device - T10134- on clamping surface -A- of
the threaded spindle in a vice.
– Push assembly cup -C- down so that it rests on the hexagon
nut -B- -arrow-.
• The inside of the assembly device and assembly cup must be
at the same level.
– Remove securing clip -arrow- from new sealing flange.
Note
The sender wheel must not be taken out of the sealing flange or
twisted.
68
Rep. gr.13 - Crankshaft group